Updated ROAR Approved Sportsman ESC List

Updated ROAR Approved Sportsman ESC List


ROAR has added some ESC’s that were not approved to the list. Check them out.

Calandra Racing Concepts CRC4000 Advanced Electronics Black Diamond LV 2.1 software or higher Has a blinking blue light when the throttle is in neutral and when set to the no-timing profile #1

Calandra Racing Concepts CRC4002 Advanced Black Diamond 2.1 software or higher Has a blinking blue light when the throttle is in neutral and when set to the no-timing profile #1

Castle Creations Mamba Max Pro V1.26

Graupner GmbH & Co. GM-Genius 120 Yellow, Red, and Green blink fast and at the same time in neutral position when the zero mode is active V13.0 Users must use Mode 0-5 after factory reset or after delivery. Modes 6-9 have high speed timing, no LED blinking. No high speed timing is allowed to set with PC-software. Mode 2 is factory setting. If high speed timing, no LED blinking.

Graupner GmbH & Co. GM-Genius 150 Yellow, Red, and Green blink fast and at the same time in neutral position when the zero mode is active V13.0 Users must use Mode 0-5 after factory reset or after delivery. Modes 6-9 have high speed timing, no LED blinking. No high speed timing is allowed to set with PC-software. Mode 2 is factory setting. If high speed timing, no LED blinking.

Graupner GmbH & Co. GM-Genius 75 Yellow, Red, and Green blink fast and at the same time in neutral position when the zero mode is active Software Version V13.0 Users must use Mode 0-5 after factory reset or after delivery. Modes 6-9 have high speed timing, no LED blinking. No high speed timing is allowed to set with PC-software. Mode 2 is factory setting. If high speed timing, no LED blinking.

Graupner GmbH & Co. GM-Genius 90 Yellow, Red, and Green blink fast and at the same time in neutral position when the zero mode is active V13.0 Users must use Mode 0-5 after factory reset or after delivery. Modes 6-9 have high speed timing, no LED blinking. No high speed timing is allowed to set with PC-software. Mode 2 is factory setting. If high speed timing, no LED blinking.

Hobbico DTXM1300 Duratrax DE10 Brushless Programable ESC A blinking green LED will be displayed when the ESC is at 0 (zero) degrees of timing and the throttle is at neutral. Also, if the ESC is at any advancement in timing the LED will be solid green

KO Propo 40051 VFS-1 BMC Ver 1.5 Contact Mfg for Firmware Upgrade Must use zero timing and zero Advanced Profile signified by blinking LED on switch.

Losi LOSB9500 1/10th Xcelorin Brushless ESC 01.01.30 Must use zero timing and zero Advanced Profile signified by blinking color LED

LRP LRP80100 Ai Brushless Reverse

LRP LRP80150 Ai Brushless Pro Reverse

LRP LRP80400 SPX Brushless Super Reverse

LRP LRP80410 Crawler ESC

LRP LRP80500 Sphere Brushless ESC

LRP LRP80705 SPX Zero Non – Updateable Zero timing when in profile 0 and Red LED is flashing

LRP LRP809050 LRP SXX “Version 2″ Competirion Brushless ESC Must use zero timing and zero Advanced Profile signified by blinking blue LED when in neutral.

LRP LRP809055 LRP SXX : Must use zero timing and zero Advanced Profile signified by blinking blue LED when in neutral.

LRP LRP80910 SXX Stock Spec Brushless N/A Must use zero timing and zero Advanced Profile signified by blinking blue LED when in neutral.

LRP LRP80915 SXX Stock Spec V2 Desc: For Spec zero timing mode, both mode 2 (torque) and mode 3(timing) must be set to zero. Blue LED will blink in neutral

Novak NOV1709 GTB 2 Sportsman Racing Brushless ESC Desc: When all timing is OFF, then white LED will be OFF to indicate no timing active.

Novak NOV1710 Novak GTB

Novak NOV1711 Novak GTB Spectrum

Novak NOV1712 Novak Slyder Drift

Novak NOV1731 Novak Havoc 1 Cell

Novak NOV1732 Novak Havoc Sport

Novak NOV1733 Havoc 3S Brushless ESC (this ESC can be run on 2S or 3S) No timing built into ESC

Novak NOV1735 Novak Havoc Pro

Novak NOV1740 Kinetic Racing Brushless ESC Version 1.0 software or higher ESC must be set at Timing Level = 1 or Zero Timing (default)

Novak NOV1741 Kinetic 1S Racing Brushless ESC Version 1.0 software or higher ESC must be set at Timing Level = 1 or Zero Timing (default) **Note, this ESC will be shipping in August 2010

Novak NOV1745 Havoc Pro SC Brushless ESC Version 1.0 software or higher ESC must be set at Timing Level = 1 or Zero Timing (default)

ORCA OBS080R1 Vritra VC4 Pro SPEC ESC Blinking green LED when the ESC is setup with no turbo and no timing. When there is�timing, or�timing and turbo�in the ESC, the LED is�Solid Red

ORCA OBS1680R Vritra VTC Pro SPEC ESC Blinking green LED when the ESC is setup with no turbo and no timing. When there is�timing, or�timing and turbo�in the ESC, the LED is�Solid Red

Speed Passion Cirtix Stock Club Race # 12280 No Timing adjustments-no LED Non-Programable

Speed Passion EXT98802LPF GT-LPF 2.0 ESC (Carbon, Silver or Blue Version) 508 Must use zero timing and zero Advanced Profile signified by blinking LED

Speed Passion EXT98802LPF LPF 2.1 ESC (Carbon, Silver, Blue) V508 Must use zero timing and zero Advanced Profile signified by blinking LED

Speed Passion EXT98802Pro GT-Pro 2.0 ESC (Carbon, Silver or Blue Version) 508 Must use zero timing and zero Advanced Profile signified by blinking LED

Speed Passion EXT98802PRO PRO 2.1 ESC (Carbon,Silver,Clue) V508 Must use zero timing and zero Advanced Profile signified by blinking LED

Tekin TT1152 Tekin RS ESC 212 ** NOTE NEW SOFTWARE PROFILE** SPEC – Non Timing Mode is displayed by LED 3&5 blinking when armed and in neutral position. AVAILABLE 10/20/2010

Tekin TT1153 Tekin RS Pro 212 ** NOTE: NEW SOFTWARE PROFILE SPEC – Non Timing Mode is displayed by LED 3&5 blinking when armed and in neutral position. AVAILABLE 10/20/2010

Submit a Comment

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>